How to Seal Coffee Bags (and Fix Bad Seals)

A coffee bag only keeps coffee fresh if the top seal is airtight. A weak or wrinkled seal lets oxygen in and undoes the work of a good bag and valve. Here is the method most small roasters use, with an impulse sealer.

What you need

  • An impulse heat sealer wide enough for your bag (a 300 mm / 12 in sealer fits most retail bags; 5 lb coffee bags need about 400 mm / 16 in)
  • A scale and a funnel
  • Your filled coffee bags

Step by step

  1. Fill to the right weight and leave about 3 to 4 cm of empty space above the coffee.
  2. Clean the seal area. Coffee dust or oil in the seal area is the number one cause of leaks. Wipe it with a dry cloth if needed.
  3. Press out extra air gently, without squeezing coffee into the seal area. The one-way valve lets the rest out later.
  4. Seal above the zipper, about 1 to 2 cm from the top edge, so customers can tear at the notch and still use the zipper.
  5. Hold the bar down for the full heat time plus 1 to 2 seconds of cooling. Opening too early weakens the seal.
  6. Check the seal. It should be flat, even and the same color all along. Pull gently; it should not peel open.

Heat settings by material

Start low and raise the setting one step at a time on a test bag. As a general guide, foil and standard kraft bags need a medium to high setting, recyclable PE bags a medium setting, and compostable coffee bags a lower setting, because plant-based films melt at lower temperatures. Always test with an empty bag from the same batch before sealing filled bags.

Fixing common problems

ProblemLikely causeFix
Seal peels openToo little heat or timeRaise heat one step or hold longer
Seal is wrinkledBag not flat, or too much heatStretch the bag flat; lower heat
Seal is burnt or holesToo much heatLower heat; check the Teflon cover
Small leaks along the sealCoffee dust in seal areaClean the area before sealing

Packing more than a few hundred bags a week? Read our guide to coffee packaging machines. Want bags that seal well? Order samples and test them on your sealer first.

Written by Asad Manan

Asad Manan runs PouchPak, a coffee packaging supplier for roasters and coffee brands. Connect on LinkedIn.

Have a question about coffee bags?

Send us a message and we reply within 24 hours (Monday to Friday).

General inquiry
Scroll to Top